Three chucks Tube Cutting Machine Introduction
New machine model is popular with many industries which has high precision cutting requirements. Three chucks can improve cutting precision, avoid shaking of tubes.
Advantages of ACME LASER CHUCKS
1. To achieve real zero tailing, laser tube cutting machine is with three chucks, the middle one can be moved, the third one can be dragged, so the end of tubes can be cut completely, which is superior to others.
2. There are perforated intersecting lines for precision cutting at both ends.
3. It will be better for long finished products. Because two chucks are clamped to avoid shaking of tubes.
Technical Parameters |
||
Model |
Laser power |
Cutting tube length |
LT-6025G |
1000W-8000W |
≤6450mm |
Cutting pipe diameter |
Cutting tail material |
Y-axis stroke |
10-250mm (outer diameter of round tube) |
≥0mm |
6850mm |
X-axis stroke |
Z-axis stroke |
X, Y-axis positioning accuracy |
850mm |
300mm |
±0.05mm/1000mm |
X, Y axis repeat positioning accuracy |
Chuck load |
Front chuck load |
±0.03/1000mm |
300KG |
Square tube, Rectangular tube, round tube, oval tube, flat tube |
Floor area |
Power of the whole machine |
Weight of the whole machine |
11585×1916×2250mm (length×width×height) |
20KW |
7 tons |
Power supply |
Acceleration |
Auxiliary gas |
380v50Hz±10% |
1.2G |
Oxygen, nitrogen, air |
Maximum feed rate |
Control system |
Support file format |
80m/min |
Professional laser equipment processing system |
IGS (available for drawing by PRO/E.UG, solidworks) |
Professional tube laser cutting machine helps many industries to slove problems, avoiding shortcomings of traditional processing, to improve working efficiency and high precision.
