Any equipment will suffer from aging after being used for a long time, and the metal laser cutting machine is no exception as a high-tech product. Among them, the laser of the fiber laser cutting machine is the most aging part, so it should be paid attention to in normal use. So how do we slow down the aging of the metal laser cutting machine during the usual use of the equipment? There are roughly two reasons for the power attenuation of the metal laser cutting machine.
Metal laser cutting machine requires regular maintenance and maintenance of the external light path of the laser generator. In fact, the power drop of the metal laser cutting machine is inevitable after working for a period of time. When the power drops to affect production, the laser and the external optical path must be maintained. When the maintenance is completed, the cutting ability will be restored to the level when leaving the factory.
The environment and conditions of the production site have a great influence on the power of the metal laser cutting machine. Such as the quality of compressed air. There is a lot of dust and smoke at the production site, and some users put paint work near the metal laser cutting machine, which will affect the cutting quality and cutting ability of the metal laser cutting machine.
So when our metal laser cutting machine has the above two problems, what methods should we take to remedy it?
Use a vacuum cleaner to remove dust and dirt from the metal laser cutting machine once a week. All electrical cabinets should be closed and dustproof.
Check the steel belt of the metal laser cutting machine frequently to ensure that it is tight. Otherwise, if there is a problem in operation, people may be injured, and serious injuries may result. The steel belt looks like a small thing, but the problem is still a bit serious.
The guide rails should be cleaned frequently to remove dust and other debris to ensure the normal operation of the metal laser cutting machine. The rack should be wiped frequently and lubricated to ensure lubrication without debris.
The regular maintenance and maintenance of the laser cutting machine can effectively delay the aging of the equipment and prolong the service life, so it should be very careful in daily use.