Metal Plates and Pipes Exchange Table Laser Cutting Machine

Model: LP-3015D
Port: Qingdao
Container Requirement: 40 Foot HQ
G.W. : 8 T

Product Introduction 

Metal Plates and Pipes Exchange Table Laser Cutting Machine  is a simple tube-sheet dual-purpose fiber laser cutting machine equipment . Combining the sheet laser cutting machine and the tube laser cutting machine into one, it not only has the cutting function of the metal sheet, but also can meet the needs of professional pipe cutting. The laser cutting machine is to focus the laser light emitted from the laser into a high-power density laser beam through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, and the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. As the relative position of the beam and the workpiece moves, the material will eventually form a slit, so as to achieve the purpose of cutting.

Technical Parameters  

Model LP-3015D
Working Area for sheet cutting 3000*1500mm (option: 4000*2000mm ,6000*2000mm)
Effective Pipe Cutting Length 6m(Option: 3m,9m,12m)
Effective Pipe Cutting Diameter Φ20-Φ210mm
Effective Square Tube Cutting Diameter □20*20-□150*150mm(manual chuck)
Laser Output Power 3000 W /2000 W /1500 W /1000W
Cutting Material Stainless steel, carbon steel, alloy, aluminum, galvanized sheet, brass, copper, etc.

Bed frame

The bed adopts an overall welding structure, which is roughened after annealing to eliminate internal stress, and finished after secondary vibration aging treatment, which better solves the stress caused by welding and processing, which greatly improves the machine tool's Stability, X, Y, Z axes are all imported from Japan with servo motors, equipped with high rigidity precision reducer, high precision ball screw, high precision helical rack and pinion, high precision linear guide and other efficient transmission mechanisms, effectively ensuring the transmission The machine tool is equipped with an automatic lubrication device, a dust removal and smoke extraction device is provided in the cutting area, and a waste truck is installed at the bottom of the cutting area to periodically pull out and clean up the waste. 

Request For Quotation